Made in the USA gun safes, safety shelters, vault doors

Safes | Gun Safes | Vaults Made in America

Which Safe should you choose?

American Gun Safes from Vault Pro USAChoosing the proper safe to keep your guns safe & secure is an important decision. Our American made Eagle Series gun safes provide superior protection against break in and fire and come in three model series: Silver, Gold and American Eagle. All our gun safes are made with pride in the USA and come with a long list of standard features not found on other safes.

Our 630 and 730 Eagle Series Safes are perfect for smaller spaces.
Our 40" Series are available in 60 and 72 in. tall versions.
The Eagle 750 Series has lots of storage space for guns and valuables.
760 Series safes are available in single and double door models.
The 760 Series provides maximum storage for guns and other valuables.

Buy safes no money down and no interest payments

2017 MODELS NEW FEATURES

NEW! American Eagle Series Safe Overview

Follow the links below for more information on each series.
Silver Eagle Series SafesGolden Eagle Series SafesAmerican Eagle Series Safes

Eagle Series Safe Sizes:
72" Tall by 30", 40", 50" or 60" Wide
60" Tall by 30" or 40" Wide
Standard safe depth is 28" (31" on 750 Series and 33" on 760 Series) including handle.

  • Vault Pro Safes are Proudly Made in Santa Fe Springs, California
  • Built to exceed UL Residential Security Container Specifications
  • Built to exceed Department of Justice standards

NEW FOR 2017!

Vault Pro Bolt Detent System

ALL Golden Eagle and American Eagle Series Safes feature Vault Pro's Bolt Detent System. The system protects your safe finish and mechanism by preventing the locking bolts from extending when door is open.

20% Larger Safes!

All 2017 750 Series Safes are now 31" depth for 11% more area. Our 760/762 Series Safes are now 33" depth, which gives you 20% more area at no additional cost!

Silver Eagle Series

10 Ga. Bent Body Construction
1 1/2 Hour Fire Protection

Hand Fit 2” Double Step System Door & Frame

  • 5-1/2” Total Door Thickness
  • Gap between door & frame is only 1/16”
  • Dual Palusol® Gaskets (Double Seals Door in Fire)

Active Bolt Locking System

  • U.L. Listed, American Made Group II Locks
  • 4" x 1-1/2” Locking Bolts
  • 3-Way Active Bolt Locking System
  • 360° Independently Rotating Bolts
  • Bolts lock behind a ¾” Protective Stepped Frame
  • 1/2" of Case Hardened (60+ Rockwell) Hard Plate
  • Titan Dual Re-locker (Brass Arm & Titan Re-Locker)
  • 14 to 18 Locking Bolts Total
    (14 on 60" models and 18 on 72" models.)

Superior Fire Protection

  • 90 minutes at 1650°
  • Maxfire - HP 2300° Ceramic Fire Blanket in Door
  • 3-layers of X-Rate fireboard in body

2 in 1 Convertible Interior

  • Plush American Made Rontex™ Interior
  • Convertible Shelving with Gun Racks

Lifetime Warranty

  • Break-in
  • Fire

Golden Eagle Series

7 Ga. (3/16") Bent Body Construction
2 Hour Fire Protection

Hand Fit 2” Double Step System Door & Frame

  • 5-1/2” Total Door Thickness
  • Gap between door & frame is only 1/16”
  • Dual Palusol® Gaskets (Double Seals Door in Fire)

Active Bolt Locking System

  • U.L. Listed, American Made Group II Locks
  • 4" x 1-1/2” Locking Bolts
  • 4-Way Active Bolt Locking System
  • 360° Independently Rotating Bolts
  • Vault Pro Bolt Detent System
  • Bolts lock behind a ¾” Protective Stepped Frame
  • 3/4" of Case Hardened (60+ Rockwell) Hard Plate
  • Titan Dual +1 Re-locker (Brass Arm & 2 ea. Titan Re-Locker)
  • 14 to 18 Locking Bolts Total
    (14 on 60" models and 18 on 72" models.)

Superior Fire Protection

  • 120 minutes at 1750°
  • Maxfire - HP 2300° Ceramic Fire Blanket in Door
  • 4-layers of X-Rate fireboard in body

Automatic L. E. D. Lighting System

  • Lights when door is opened
  • Dual Gang Electrical Outlet
  • American Made

2 in 1 Convertible Interior

  • Plush American Made Rontex™ Interior
  • Convertible Shelving with Gun Racks

Lifetime Warranty

  • Break-in
  • Fire

American Eagle Series

1/4" Bent Body Construction
2 Hour Fire Protection

Hand Fit 2” Double Step System Door & Frame

  • 1/4" Steel Door Plate - 5-1/2” Total Door Thickness
  • Gap between door & frame is only 1/16”
  • Dual Palusol® Gaskets (Double Seals Door in Fire)
  • 1/4" Inner Steel Safe Door Plate

Active Bolt Locking System

  • U.L. Listed, American Made Group II Locks
  • 4" x 1-1/2” Locking Bolts
  • 4-Way Active Bolt Locking System
  • 360° Independently Rotating Bolts
  • Vault Pro Bolt Detent System
  • Bolts lock behind a ¾” Protective Stepped Frame
  • 1" of Case Hardened (60+ Rockwell) Hard Plate
  • Titan Quadruple +1 Re-locker (Brass Arm & 4 ea. Titan Re-Locker)
  • 14 to 18 Locking Bolts Total
    (14 on 60" models and 18 on 72" models.)
  • Solid Brass or Solid Stainless Steel Handle

Superior Fire Protection

  • 120 minutes at 1880°
  • Maxfire - HP 2300° Ceramic Fire Blanket in Door
  • 3-layers of X-Rate fireboard in body

L. E. D. Lighting & Electrical

  • Lights when door is opened
  • Dual Gang Electrical Outlet
  • American Made

3 in 1 Convertible Interior

  • Plush American Made Rontex™ Interior
  • Convertible Shelving with 2 Gun Rack Styles

Lifetime Warranty

  • Break-in
  • Fire
Click link for Silver Eagle Series.
Silver Eagle Series Safes
Click link for Golden Eagle Series.
Golden Eagle Series Safes
Click link for American Eagle Series
American Eagle Series Safes

American made gun safes ready for shipping for sale
Superior Quality American Made Safes from Vault Pro USA

Step System Safe Door and Frame with Palusol GasketsWhy Vault Pro?

While other safe companies are happy to import cheap foreign made products, Vault Pro builds our American made safes to exceed all standards of the industry, including: DOJ, U.L. RSC. Example. The State of California Department of Justice has the most stringent regulatory gun safe standards of any state. A safe must have all the following to meet D.O.J. Standards:

 1. A safe shall be able to fully contain firearms and provide for their secure storage;

Not only are Vault Pro Gun Safes able to fully contain firearms and provide for their secure storage, but we do it with state of the art security features and fire protection and style like no other.


 2. Safes shall have a locking system consisting of at minimum a mechanical or electronic combination lock. The mechanical or electronic combination lock utilized by the safe shall have at least 10,000 possible combinations consisting of a minimum three numbers, letters, or symbols. The lock shall be protected by a case-hardened (Rc 60+) drill-resistant steel plate, or drill-resistant material of equivalent strength;

Vault Pro uses only American Made Sargent & Greenleaf  UL Listed Group II Locks and offer a myriad of upgrades including Group 1 locks, Redundant Locks, Dual Locking Systems and Biometric Locks.

Vault Pro doors include up to an inch of Case Hardened (Rc 60+) Drill Resistant Hard Plate… The least amount of Case Hardened (Rc 60+) Drill Resistant Hard Plate used in any of our safe doors is ½” (double the thickness used in most other companies doors). We simply provide more protection for your American Made Lock.


 3. Boltwork shall consist of a minimum of three steel locking bolts of at least ½ inch thickness that intrude from the door of the safe into the body of the safe or from the body of the safe into the door of the safe, which are operated by a separate handle and secured by the lock;

Step system safe door with fire insulation and anti pry featuresVault Pro has engineered our Boltwork to be the strongest and smoothest acting. Our Eagle Series Locking Bolts are all 1-1/2” in diameter and 4” in length.

Our Locking Bolts independently rotate 360° on a 10 gauge boxed bolt carriage (heavier than any of our competition) and are connected using a grade 5 Hex Bolt. Don’t settle for cheap angle iron or u-shaped bolt carriages that require anti-pry tabs because they bend under pressure.

As important as the Locking Bolts are…they aren’t anything without a strong frame to lock behind. While most manufacturers use the minimum thickness and quality of steel bent into an L-Shape as a door stop, Vault Pro uses a Multi-Stepped frame that seals against the door on at least 5 points and is ¾” thick. Again…Vault Pro puts more steel and more protection into your safe providing you with the peace of mind you deserve.


 4. Safes shall be capable of repeated use. The exterior safe walls shall be constructed of a minimum 12-gauge thick steel for a single-walled safe, or the sum of the steel walls shall add up to at least .100 inches for safes with two walls. Doors shall be constructed of a minimum of two layers of 12-gauge steel, or one layer of 7-gauge steel compound construction;

Safe bolt detent system12 gauge is 0.1046 (a lot less than 1/8” thick or 0.1250). In a pry attack this flimsy safe loses every time.

Vault Pro uses only premium quality steel and a minimum steel thickness of 10 gauge (0.1345, which is well over 1/8”) on the body and offers safes built using 7 gauge (0.1793 or 3/16”) and 3 gauge (1/4” or 0.250) for even greater protection.

Vault Pro Doors start with a hand fit ¼” plate of steel and reinforce that plate with a 10 gauge bolt guide as well as a z-shaped step system all the way around the door, by far exceeding what the D.O.J. requires. It only gets better from there. If you want the best protection for your valuables…you found it & Vault Pro builds it right here in America.


 5. Safe door hinges shall be protected to prevent the removal of the door. Protective features include, but are not limited to: hinges not exposed to the outside, interlocking door designs, dead bars, jeweler’s lugs and active or inactive locking bolts.

Would be thieves may grind away at hinges thinking they will be able to get the door to open from the hinge side. If they want to take a grinder to Vault Pro’s hinges they will need to pack a lunch and maybe a sleeping bag because our hinges are 1-1/4” diameter x .250 D.O.M. (Seamless) barrels with a ¾” cold rolled steel hinge pin. Even if the hinges are removed completely, there is a minimum of 7-1/2” of steel on 60” tall models still locked behind the frame protecting your valuables from hinge attacks. On Vault Pro’s 72” tall models there is over 10-1/2” of steel for even greater protection from hinge attacks.

Each finished safe is proudly stamped Made in USA.
Safes ready for final inspection, weighing and packing for shipping

Gun Safes made in USA

Our Safes Easily Exceed DOJ Standards and are Made in America

Made in the USA gun safes, safety shelters, vault doors





At Vault Pro, made in the USA still means something. Who makes the best gun safes? Don't be fooled by companies that sell cheap foreign made safes. All Vault Pro gun safes & vaults are made in America. Protect your guns and valuables against burglary, theft and fire with a new tool resistant, fire resistant safe from Vault Pro. Follow the links for more information about our new Eagle Series models. For more information about our quality American made safes and a dealer near you call us: 800-299-6929.

American Eagle Series safe fire and anti break in system
Dual Palusol Gasket System
Dual Palusol® Fire Gasket System
Dual Palusol Fire Gasket System
Our Dual Palusol® Fire Gasket System helps protect your contents from both heat and smoke infiltration from fire.

MaxFire HP 2300° Ceramic Fire Blanket Hands on Torch Test

Made With Pride in the USA
American made safe production line

Most Vault Pro safes are built using one piece of steel bent from the left side of the body around the back to the right side. We can then square, fit and weld the top and bottom of the body with full length welds both inside and out.

Once the safe bodies are fire insulated, the step system frame is built and shelving tracks are added. Each body gets a hand cut and custom fitted step system door that is mated precisely to the body with a tolerance of no more than 1/16". The door is then built and hinged with very heavy duty hinges.

American made safe worker American made gun safes being assembled
Quality construction begins with quality materials in the hands of skilled craftsman.


WE ALSO BUILD CUSTOM SAFES
We place an emphasis on High End and Custom Safes
CALL US: 800-299-6929

Vault Pro USA Eagle Series models meet the demands of most of our customers, however, you may require a specific size and configuration to meet your security needs. Our custom safe manufacturing facility can make virtually any size and configuration safe.

You may add many custom options like hidden floors, long gun & pistol door backs, safe in safe options, custom interiors and custom paint and pinstriping. Please contact us with your specifications for a free quote.

Custom gun safe interior by Vault Pro USA

We can build your custom safe to any size and configuration.
Click for custom gun safes
CALL US FOR A FREE QUOTE - 800-299-6929

Back to top

Some models may be shown with both standard and optional hardware and accessories. Please call for details.

The Monster Gun Safe™ of Vault Pro USA

*Palusol is a registered trademark of BASF, Corporation